NEW 28MM CARB TOP

Specials from vendors to registered board members. Please let them know you are a member of the board when you are placing the order!

Moderators: Pool Man, chili man, choochoo

NEW 28MM CARB TOP

Postby blossomracing » Mon Dec 24, 2012 12:24 pm

New the 28MM Carb Top with subbort bracket.

Image

Comes complete with top, brace and fitting.

Image

Get yours now for only $44.95
User avatar
blossomracing
 
Posts: 126
Joined: Wed Jan 12, 2011 12:25 pm
Location: Sand Lake

Postby Pool Man » Mon Dec 24, 2012 3:15 pm

Now that is pretty trick. I really like that. Good job guys.
I deserve respect for the things that i DO NOT do.
User avatar
Pool Man
 
Posts: 13747
Joined: Thu Dec 25, 2003 5:11 pm
Location: Chesapeake, Va.

Postby lyork » Mon Dec 24, 2012 3:44 pm

Just in time to for the 2013 season (and 2013 rules).
Any way to incorporate an idle adjuster into that Craig?
That would make it ideal!
lyork
 
Posts: 782
Joined: Tue May 29, 2007 9:12 pm
Location: Kansas City

Postby blossomracing » Wed Dec 26, 2012 5:01 pm

There is actually a throttle adjuster on the top, its the spring and metal cable holder, When putting your cable in just make sure its adjusted all the way down and then just back it out a little to adjust your rpm.
User avatar
blossomracing
 
Posts: 126
Joined: Wed Jan 12, 2011 12:25 pm
Location: Sand Lake

Postby Mister GTO » Thu Jan 03, 2013 11:40 pm

Very cool! Anything for the 33mm?
Team Viperizer Driver Rev'n Devin. http://www.viperizerracing.com

Image
Mister GTO
 
Posts: 597
Joined: Wed May 02, 2012 9:52 am
Location: Prince Frederick, MD

Postby blossomracing » Fri Jan 04, 2013 12:43 pm

Yes we also have tops for the 33mm and the 42mm carbs. Check out our website under the carb section.

blossomracingengines.com
User avatar
blossomracing
 
Posts: 126
Joined: Wed Jan 12, 2011 12:25 pm
Location: Sand Lake

Postby Mister GTO » Fri Jan 04, 2013 12:54 pm

blossomracing wrote:Yes we also have tops for the 33mm and the 42mm carbs. Check out our website under the carb section.

blossomracingengines.com

Do you have any pics of it mounted? Just comparing different styles and how they mount. Thanks
Team Viperizer Driver Rev'n Devin. http://www.viperizerracing.com

Image
Mister GTO
 
Posts: 597
Joined: Wed May 02, 2012 9:52 am
Location: Prince Frederick, MD

Postby blossomracing » Fri Jan 04, 2013 2:29 pm

Here is a picture of the 42mm, the 33mm bolts on the same way.


Image
User avatar
blossomracing
 
Posts: 126
Joined: Wed Jan 12, 2011 12:25 pm
Location: Sand Lake

Postby Mister GTO » Fri Jan 04, 2013 2:41 pm

PM sent
Team Viperizer Driver Rev'n Devin. http://www.viperizerracing.com

Image
Mister GTO
 
Posts: 597
Joined: Wed May 02, 2012 9:52 am
Location: Prince Frederick, MD


Return to Sponsors Vendor Specials

Who is online

Users browsing this forum: No registered users and 1 guest

cron