| View previous topic :: View next topic |
| Author |
Message |
Sharx
Joined: 25 Oct 2008
Posts: 116
|
 Posted: Fri Jan 01, 2010 6:43 pm Post subject: Sharx Design is now offering SharxSkinz™ DIY wrap kits |
 |
|
Sharx Design is now offering SharxSkinz™ DIY wrap kits for $399. We use the highest quality 3M™ Controltac™ Graphic Film with Comply™
The kits will allow the user to wrap the sides of a the Junior typically in less than three hours. We will include detailed instructions and the needed equipment. (A rigid and felt squeege, plus a lil' scraper to aid in removing any decals before installation) We will also have instructional videos to aid installation. With care and a little patience I feel even a novice will get great results. If you live in the area we will install it for an additional $150 in our shop. This is a great way to update the look of your car for very little.
As an added bonus we will offer a $100 gift card for any age group winner or $50 gift card for a runner-up at the ECF or WCF that uses a SharxSkinz™ and displays our decal
If you have any questions feel free to email or pm me.
http://www.sharxskinz.com/#7
 |
|
| Back to top |
|
 |
Pool Man
Joined: 25 Dec 2003
Posts: 8249
Location: Gates, NC
|
| Posted: Fri Jan 01, 2010 7:49 pm Post subject: |
|
|
This is a pretty good deal. A do it yourself wrap with complete instructions. I hope everyone will take a look at this offer. What a way to get a great look and save some money also.
_________________
I deserve respect for the things that i DO NOT do. |
|
| Back to top |
|
|
dragjr822
Joined: 25 Nov 2008
Posts: 76
|
| Posted: Sun Jan 17, 2010 5:15 pm Post subject: |
|
|
| the add says wrap the sides i assume this is two seperate peices?????We have been thinking about a wrap but would need to cover the entire car.Is that something you offer if so how much $??? And would it be one peice?Those are just a couple questions for now dont want to waiste alot of your time as we are not sure of what we are doing yet.Thanks Andy |
|
| Back to top |
|
|
Sharx
Joined: 25 Oct 2008
Posts: 116
|
| Posted: Mon Jan 18, 2010 8:50 am Post subject: |
|
|
| The diy kit is two pieces. Typically on a full wrap we try and minimize the seams by printing it so seams end up on body seams, but many junior bodies are one piece of fiberglass or aluminum. It is difficult to print in one piece, the typical install is two pieces. We charge between $750 - $1,000 to design and install a full wrap on a Junior body. This is significantly more difficult so I don't recommend it as a diy kit. |
|
| Back to top |
|
|
Sharx
Joined: 25 Oct 2008
Posts: 116
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
